{"title":"Porsche","description":"","products":[{"product_id":"porsche-boxster-986-991-996-rms-rear-seal-tool-1997-2004-1997-2006","title":"Porsche Boxster 986 Boxster \u0026 996 991 RMS Rear Seal tool 1997 - 2004 \/ 1997 - 2006","description":"\u003cp\u003e🔧 Porsche 996 \/ 986 Rear Main Seal Installer Tool – 13mm Depth w\/ Flywheel Bolt Press-In 🏁🛠️\u003c\/p\u003e\n\u003cp\u003eInstalling a rear main seal (RMS) on your Porsche 996 or 986 engine? This custom-fit tool makes the job clean, consistent, and leak-free. Designed specifically for these engines, it uses the flywheel bolts to press the seal evenly to the correct depth—no hammering, no guessing! 🎯 🔥\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cp\u003e✅ Perfect Fit for Porsche 996 911 \u0026amp; 986 Boxster Engines\u003c\/p\u003e\n\u003cp\u003e✅ Seats Seal to OEM Spec – 13mm Below Crank Flange\u003c\/p\u003e\n\u003cp\u003e✅ Bolt-Driven Install – Use your flywheel bolts to press the seal evenly\u003c\/p\u003e\n\u003cp\u003e✅ Rivet Clearance Design – Built-in orientation to clear the flywheel flange rivet\u003c\/p\u003e\n\u003cp\u003e✅ DIY-Friendly \u0026amp; Pro-Grade – Simple enough for your garage, precise enough for the shop 🔧\u003c\/p\u003e\n\u003cp\u003e✅ Reusable \u0026amp; Durable – 3D printed with high-quality material, ready for repeated use 💪 🧠\u003c\/p\u003e\n\u003cp\u003eHow to Use: Position the RMS and this tool over the crankshaft Use your flywheel bolts to slowly and evenly press the seal into place Ensure proper orientation to avoid interference with the flywheel rivet Done! Seal will sit 13mm below the crank flange as specified ✅ ⚙️\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included:\u003c\/p\u003e\n\u003cp\u003e1× Porsche 996 \/ 986 Rear Main Seal Installer Tool (Flywheel bolts \u0026amp; seal not included)\u003c\/p\u003e\n\u003cp\u003eNote From the Maker! This part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯 You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design: This product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration. Any resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer: We are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us. ⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042208792814,"sku":"POR-986996-UNI-RMS-01","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-1140.heic?v=1776854545"},{"product_id":"porsche-cayenne-958-dual-cup-holder-insert-w-coin-pocket-2011-2017","title":"Porsche Cayenne 958 Dual Cup Holder Extender Insert 2011–2018","description":"\u003cp\u003e🛠️ Porsche Cayenne 958 Dual Cup Holder Insert w\/ Coin Pocket | 2011–2017 | 3D-Printed ABS\u003c\/p\u003e\n\u003cp\u003eUpgrade your Cayenne’s shallow factory cup holders with this precision 3D-printed insert. Snap it in place—no tools needed—and lock in two drinks plus a handy coin pocket, all while keeping your 12 V outlet free.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eOEM-Spec Fit: Modeled to match part 958-553-981-01\u003cbr\u003eDual Cup Design: Deep holds for two beverages\u003cbr\u003e12 V Outlet Access: Keeps power port clear \u0026amp; usable\u003cbr\u003eTool-Free Install: Snap in\/out in seconds with no trimming\u003cbr\u003eDurable ABS: Heat- and impact-resistant for long life\u003c\/p\u003e\n\u003cp\u003eFits These Models\u003cbr\u003ePorsche Cayenne 958 (2011, ’12, ’13, ’14, ’15, ’16, ’17)\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042208989422,"sku":"POR-CAY-958-CUP-01","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0327.jpg?v=1774284971"},{"product_id":"porsche-cayenne-958-ash-tray-phone-mount-replaces-ashtray-17mm-ball-oem-look-fits-2011-2014","title":"Porsche Cayenne 958 - 2011-2014 - Ash Tray Phone Mount – Replaces Ashtray - 17mm ball","description":"\u003cp\u003e📱 Custom Phone Mount for 2011-2018 Porsche Cayenne (958) – Ashtray Replacement | OEM Look \u003c\/p\u003e\n\u003cp\u003eUpgrade your driving experience with this clean, OEM-style phone mount solution designed specifically for the 2011-2018 Porsche Cayenne (958 chassis). This mount replaces the ashtray insert and provides a perfect platform to install a mount  \u003c\/p\u003e\n\u003cp\u003e🔧 Key Features:\u003cbr\u003e- Direct Ashtray Replacement – Fits snugly into the ashtray compartment for a flush, factory look.\u003cbr\u003e- Mount-Ready Design – Pre-drilled center hole allows for easy installation of almost any mount\u003cbr\u003e- No Wobble. No Rattle. – Extremely solid connection with zero movement, even on bumpy roads or spirited drives.\u003cbr\u003e- Compatible with Most Mounts – Ideal for Steelie-style mounts or similar magnetic phone holders found on Amazon.\u003cbr\u003e- OEM Aesthetic – Keeps your Porsche's interior sleek and uncluttered.\u003c\/p\u003e\n\u003cp\u003e📦 What's Included:\u003cbr\u003e1x Ashtray Replacement Mount (for 2011-2018 Porsche Cayenne, 958)\u003cbr\u003e1x ball holder- 17mm\u003cbr\u003ePre-drilled center hole for magnetic ball mount installation\u003c\/p\u003e\n\u003cp\u003e*magnet mount includes magnet for non-mag’d phones*\u003c\/p\u003e\n\u003cp\u003e*Disclaimer: You may experience the mount covering part of the dashboard*\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"With Clip","offer_id":47042210758894,"sku":"POR-CAY-958-PHN+CL-01","price":20.95,"currency_code":"USD","in_stock":true},{"title":"Without Clip","offer_id":47042210791662,"sku":"POR-CAY-958-PHN-01","price":14.45,"currency_code":"USD","in_stock":true},{"title":"Magnet Mount","offer_id":47166242423022,"sku":"POR-CAY-958-PHN+MAG-01","price":21.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0034.jpg?v=1773712363"},{"product_id":"porsche-924-944-alternator-cooling-duct-1976-1988-1982-1991","title":"Porsche 924 944 Alternator Cooling Duct REPLACEMENT 1976-1988, 1982 - 1991","description":"\u003cp\u003e🛠️ Porsche 924 \/ 944 Alternator Cooling Duct | 1976–1988 \u0026amp; 1982–1991 | 3D-Printed ABS OEM Spec\u003c\/p\u003e\n\u003cp\u003eKeep your classic Porsche’s alternator running cool with this direct-fit replacement cooling duct, printed to exact OEM dimensions in durable ABS. By channeling fresh air directly onto your alternator, it helps prevent heat soak and voltage drop—critical for reliable charging under all driving conditions.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eOEM-Spec Fit: Modeled to match factory duct dimensions for 924 \u0026amp; 944 engine bays\u003cbr\u003eHigh-Temp ABS: Rigid, heat-resistant material stands up to under-hood conditions\u003cbr\u003eDirect Replacement: No trimming or modification—snaps right into the original mounting points\u003cbr\u003eOptimized Airflow: Precisely shaped to channel cool air directly to the alternator fins\u003cbr\u003e3D-Printed Precision: Layer-by-layer accuracy ensures consistent performance\u003c\/p\u003e\n\u003cp\u003eFits These Models \u0026amp; Years\u003cbr\u003ePorsche 924: 1976, ’77, ’78, ’79, ’80, ’81, ’82, ’83, ’84, ’85, ’86, ’87, ’88\u003cbr\u003ePorsche 944 (all variants): 1982, ’83, ’84, ’85, ’86, ’87, ’88, ’89, ’90, ’91\u003c\/p\u003e\n\u003cp\u003eWhy You’ll Love It\u003cbr\u003e⚡ Keeps Charging Strong: Prevents alternator overheating and voltage drop\u003cbr\u003e🔧 Shop-Ready: Solid ABS won’t crack under heat, oil, or road debris\u003cbr\u003e🏁 Restoration \u0026amp; Maintenance: Perfect for restoring original under-hood appearance\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042211512558,"sku":"POR-924944-UNI-ALTCL-01","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/A6ECF2A2-6613-40F1-A4FE-6C75A0F5B43A.jpg?v=1774154542"},{"product_id":"porsche-911-996-clutch-alignment-tool-1998-2005-carrera","title":"Porsche 911 Carrera 996 Clutch Alignment Tool 1998 - 2005","description":"\u003cp\u003eClutch Alignment Tool for Porsche 911 (996) – 1998–2004 | Precision Fit for Carrera Models\u003cbr\u003eMaintain peak performance during your clutch service with this clutch alignment tool, custom-crafted for the Porsche 911 (996) model range from 1998 to 2004. Whether you're a seasoned Porsche mechanic or a dedicated DIYer, this tool ensures precise alignment of your clutch components, making installations smoother and more accurate.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 996 platform, this tool supports proper clutch engagement and helps prevent premature wear—essential for preserving the driving experience Porsche is known for.\u003c\/p\u003e\n\u003cp\u003eProduct Specs:\u003cbr\u003eCompatible with Porsche 911 (996) Carrera – 1998 to 2004\u003cbr\u003e23 splines\u003cbr\u003e1\" diameter shaft\u003cbr\u003e15 mm pilot tip\u003c\/p\u003e\n\u003cp\u003eWhy You’ll Love It:\u003cbr\u003ePrecision fit for the Porsche 996 clutch system\u003cbr\u003eEnsures accurate alignment for clutch disc and pilot bearing\u003cbr\u003eMakes clutch replacements easier, faster, and more reliable\u003cbr\u003eIdeal for professional use or at-home garage projects\u003cbr\u003eDurable, reusable construction built for repeated use\u003c\/p\u003e\n\u003cp\u003eCondition: Brand New\u003cbr\u003eShipping: Fast and secure via USPS\u003c\/p\u003e\n\u003cp\u003eGive your 911 the attention it deserves—order today and make your next clutch job a breeze.\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042211905774,"sku":"POR-996-UNI-ACT-01","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0898.jpg?v=1776103557"},{"product_id":"porsche-boxster-s-986-clutch-alignment-tool-1999-2004","title":"Porsche Boxster 986 \/ 986 S clutch alignment tool 1999 - 2004)","description":"\u003ch2 data-start=\"220\" data-end=\"293\"\u003e🔧 Clutch Alignment Tool for Porsche Boxster 986 \/ 986 S (1997–2004)\u003c\/h2\u003e\n\u003cp data-start=\"294\" data-end=\"337\"\u003e🇺🇸 \u003cstrong data-start=\"299\" data-end=\"318\"\u003eMade in the USA\u003c\/strong\u003e | 🆕 \u003cstrong data-start=\"324\" data-end=\"337\"\u003eBrand New\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"339\" data-end=\"502\"\u003eGet your clutch job done right the first time with this \u003cstrong data-start=\"395\" data-end=\"424\"\u003ecustom-fit alignment tool\u003c\/strong\u003e, precision-made for the \u003cstrong data-start=\"449\" data-end=\"494\"\u003ePorsche Boxster 986 and 986 S (1997–2004)\u003c\/strong\u003e 🏎️💨\u003c\/p\u003e\n\u003cp data-start=\"504\" data-end=\"659\"\u003eWhether you’re a seasoned mechanic or a weekend Porsche warrior, this tool ensures perfect alignment for smooth shifts and long-lasting clutch performance.\u003c\/p\u003e\n\u003chr data-start=\"661\" data-end=\"664\"\u003e\n\u003ch3 data-start=\"666\" data-end=\"696\"\u003e⚙️ Fitment Options \u0026amp; Specs\u003c\/h3\u003e\n\u003cp data-start=\"698\" data-end=\"727\"\u003e\u003cstrong data-start=\"698\" data-end=\"725\"\u003eBoxster 986 (1997–2004)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"728\" data-end=\"796\"\u003e\n\u003cli data-start=\"728\" data-end=\"741\"\u003e\n\u003cp data-start=\"730\" data-end=\"741\"\u003e23 spline\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"742\" data-end=\"767\"\u003e\n\u003cp data-start=\"744\" data-end=\"767\"\u003eTip Diameter: 14.8 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"768\" data-end=\"796\"\u003e\n\u003cp data-start=\"770\" data-end=\"796\"\u003eSpline Diameter: 23.8 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"798\" data-end=\"829\"\u003e\u003cstrong data-start=\"798\" data-end=\"827\"\u003eBoxster 986 S (1997–2004)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"830\" data-end=\"898\"\u003e\n\u003cli data-start=\"830\" data-end=\"843\"\u003e\n\u003cp data-start=\"832\" data-end=\"843\"\u003e23 spline\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"844\" data-end=\"869\"\u003e\n\u003cp data-start=\"846\" data-end=\"869\"\u003eTip Diameter: 14.9 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"870\" data-end=\"898\"\u003e\n\u003cp data-start=\"872\" data-end=\"898\"\u003eSpline Diameter: 25.3 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"900\" data-end=\"963\"\u003e\u003cem data-start=\"900\" data-end=\"963\"\u003e(Choose your model before purchase to ensure proper fitment.)\u003c\/em\u003e\u003c\/p\u003e\n\u003chr data-start=\"965\" data-end=\"968\"\u003e\n\u003ch3 data-start=\"970\" data-end=\"995\"\u003e🛠️ Why You Need It\u003c\/h3\u003e\n\u003cp data-start=\"996\" data-end=\"1273\"\u003e✔️ Precision fit for Porsche 986 \u0026amp; 986 S\u003cbr data-start=\"1036\" data-end=\"1039\"\u003e✔️ Aligns clutch disc \u0026amp; pilot bearing perfectly 🎯\u003cbr data-start=\"1089\" data-end=\"1092\"\u003e✔️ Improves clutch performance \u0026amp; lifespan 💪\u003cbr data-start=\"1136\" data-end=\"1139\"\u003e✔️ Reusable, lightweight, and easy to handle\u003cbr data-start=\"1183\" data-end=\"1186\"\u003e✔️ Made from heat-resistant, durable ABS plastic 🧱\u003cbr data-start=\"1237\" data-end=\"1240\"\u003e✔️ Proudly made in the USA 🇺🇸\u003c\/p\u003e\n\u003cp data-start=\"1275\" data-end=\"1349\"\u003e📦 \u003cstrong data-start=\"1278\" data-end=\"1292\"\u003eCondition:\u003c\/strong\u003e Brand New\u003cbr data-start=\"1302\" data-end=\"1305\"\u003e📬 \u003cstrong data-start=\"1308\" data-end=\"1321\"\u003eShipping:\u003c\/strong\u003e Fast \u0026amp; secure via USPS 🚀\u003c\/p\u003e\n\u003cp data-start=\"1351\" data-end=\"1451\"\u003eSkip the guesswork and save the stress 😅\u003cbr data-start=\"1392\" data-end=\"1395\"\u003eOrder now and \u003cstrong data-start=\"1409\" data-end=\"1444\"\u003eshift smoother, faster, better!\u003c\/strong\u003e ⚙️🔥\u003c\/p\u003e\n\u003chr data-start=\"1453\" data-end=\"1456\"\u003e\n\u003ch3 data-start=\"1458\" data-end=\"1486\"\u003e⚙️ Note From the Maker\u003c\/h3\u003e\n\u003cp data-start=\"1487\" data-end=\"1687\"\u003eThis part is \u003cstrong data-start=\"1500\" data-end=\"1514\"\u003e3D-printed\u003c\/strong\u003e, not OEM — so it may not look factory-perfect 👀 but it \u003cstrong data-start=\"1571\" data-end=\"1593\"\u003eworks like a charm\u003c\/strong\u003e 🔥💯\u003cbr data-start=\"1598\" data-end=\"1601\"\u003eYou might see some texture or layer lines — that’s just \u003cstrong data-start=\"1657\" data-end=\"1682\"\u003e3D-printing character\u003c\/strong\u003e 😎\u003c\/p\u003e\n\u003chr data-start=\"1689\" data-end=\"1692\"\u003e\n\u003ch3 data-start=\"1694\" data-end=\"1719\"\u003e🧠 About the Design\u003c\/h3\u003e\n\u003cp data-start=\"1720\" data-end=\"1890\"\u003eEach tool is designed from scratch using \u003cstrong data-start=\"1761\" data-end=\"1832\"\u003ereal-world measurements, 3D scanning, and community-driven insights\u003c\/strong\u003e to deliver perfect alignment and long-term reliability.\u003c\/p\u003e\n\u003chr data-start=\"1892\" data-end=\"1895\"\u003e\n\u003ch3 data-start=\"1897\" data-end=\"1916\"\u003e🚫 Disclaimer\u003c\/h3\u003e\n\u003cp data-start=\"1917\" data-end=\"2122\"\u003eWe are an independent business and \u003cstrong data-start=\"1952\" data-end=\"1998\"\u003enot affiliated with or endorsed by Porsche\u003c\/strong\u003e or any automaker.\u003cbr data-start=\"2016\" data-end=\"2019\"\u003eTrademarks, brand names, or OEM references are used solely for \u003cstrong data-start=\"2082\" data-end=\"2119\"\u003ecompatibility and fitment clarity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"2124\" data-end=\"2309\"\u003e⚠️ \u003cstrong data-start=\"2127\" data-end=\"2144\"\u003eFitment Note: \u003c\/strong\u003ePlease confirm fitment with your vehicle before purchase. Buyer-requested returns may be subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Boxster","offer_id":47070635622638,"sku":"POR-986-UNI-ACT-01","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Boxster S","offer_id":47070635655406,"sku":"POR-986S-UNI-ACT-01","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0893.png?v=1776104108"},{"product_id":"porsche-981-cayman-gopro-mount-cross-bar-for-track-days-2017-2025-black","title":"Porsche 718 Cayman Boxster 981 982 Camera Mount Crossbar Clamp | 2012-2025 Track Day POV","description":"\u003cp\u003e\u003cstrong\u003ePorsche 718 Cayman \/ Boxster Camera Mount Crossbar Clamp – 2012-2025 981 982\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCapture clean in-cabin driving footage with this custom camera mount clamp designed for the \u003cstrong\u003e2012-2025 Porsche 718 Cayman and Boxster 981 982\u003c\/strong\u003e. This 2-piece clamp mounts to the rear interior crossbar behind the seats, giving you a stable, centered mounting point for track days, spirited drives, road trips, and POV driving videos.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the \u003cstrong\u003e3D printed crossbar clamp only\u003c\/strong\u003e.\u003cbr\u003e\u003cstrong\u003eCamera, action camera, camera adapter, and camera mounting arm are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Porsche 718 - 981 982 Models\u003c\/strong\u003e\u003cbr\u003eFits the rear interior bar behind the seats on compatible 2012-2025 Porsche 718 Cayman and Boxster models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStable Interior POV Mounting Point\u003c\/strong\u003e\u003cbr\u003eGreat for track day footage, autocross, canyon drives, road trips, vlogging, or interior driving content.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2-Piece Clamp Design\u003c\/strong\u003e\u003cbr\u003eThe clamp installs around the rear crossbar and creates a secure mounting base for your camera adapter or mount setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Drilling or Permanent Modification\u003c\/strong\u003e\u003cbr\u003eInstalls without cutting, drilling, or permanently altering your Porsche interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable ABS Plastic\u003c\/strong\u003e\u003cbr\u003e3D printed from ABS plastic for a lightweight, strong, and heat-resistant design suitable for automotive interior use.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cp\u003e1x 2-piece camera mount crossbar clamp\u003c\/p\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cp\u003eCamera\u003cbr\u003eAction camera\u003cbr\u003eGoPro-style adapter\u003cbr\u003eCamera arm\u003cbr\u003eBall mount\u003cbr\u003eAny additional camera mounting hardware\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/h3\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Yes","offer_id":49389518553326,"sku":null,"price":18.45,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":49389518586094,"sku":null,"price":12.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-3322.png?v=1782358126"},{"product_id":"porsche-944-early-sunroof-motor-track-junction-1982-1984-reinforced","title":"Porsche Carrera 944 Early Sunroof Motor Track Junction (1982–1984) - reinforced","description":"\u003cp\u003ePorsche 944 Early Sunroof Motor Track Junction (1982–1984) | ABS | Fast Shipping\u003c\/p\u003e\n\u003cp\u003e🔧 Product Overview:\u003cbr\u003eIf you own an early Porsche 944 (1982–1984), you know how tricky it can be to find parts for the factory sunroof system. This 3D-printed ABS motor track junction is designed to fit between the sunroof motor and the aluminum rail, recreating the hard-to-find original part that often wears out or goes missing over time.\u003c\/p\u003e\n\u003cp\u003e✅ Fits:\u003cbr\u003ePorsche 944 (1982, 1983, early 1984)\u003cbr\u003eDesigned specifically for early-model sunroof systems\u003c\/p\u003e\n\u003cp\u003e✅ Key Features:\u003cbr\u003eMade from Durable ABS: Strong, heat-resistant, and built to last.\u003cbr\u003eOEM-Inspired Fit: Matches original dimensions for easy installation.\u003cbr\u003eSolves Common Failure Point: Restores smooth sunroof operation by securely linking the motor and track.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included:\u003cbr\u003e1x Sunroof Motor Track Junction (junction only—no motor or rail included)\u003c\/p\u003e\n\u003cp\u003eBring your classic 944’s sunroof back to life without the frustration of tracking down rare, expensive factory parts!\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042214854894,"sku":"POR-944-UNI-SNTRK-01","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0920.jpg?v=1776105933"},{"product_id":"porsche-944-sunroof-gearbox-housing-replacement-1985-1991-late-style","title":"Porsche 944 Sunroof Gearbox Housing Replacement 1985 - 1991 (Late-Style)","description":"\u003cp\u003ePorsche 944 Sunroof Gearbox Housing Replacement (85.5+ Late-Style) | ABS | Fast Shipping\u003cbr\u003eFits 1985-1991\u003c\/p\u003e\n\u003cp\u003e🔧 Product Overview:\u003cbr\u003eTired of dealing with hard-to-find sunroof gearbox parts for your Porsche 944? This 3D-printed ABS replacement gearbox housing is the solution you've been looking for—designed specifically to allow late-style cable drive assemblies to be installed into early-model 944s (like 1984) that have different roofline mounting provisions.\u003c\/p\u003e\n\u003cp\u003e✅ Fits:\u003cbr\u003ePorsche 944 (Late Model 85.5+ with late-style cable drive assemblies)\u003cbr\u003eIdeal for adapting late-style gearbox into earlier cars (such as 1983–1985 models)\u003c\/p\u003e\n\u003cp\u003e✅ Key Features:\u003cbr\u003eDurable ABS Construction: Strong, heat-resistant, and built to last.\u003cbr\u003ePrecision Fit: Designed to work seamlessly with late-style sunroof cables and housings.\u003cbr\u003eDIY Friendly: Simplifies retrofitting process for older models.\u003cbr\u003eFast Shipping: Get back on the road (or track) without long waits.\u003c\/p\u003e\n\u003cp\u003e💡 Whether you’re restoring a classic 944 or upgrading to the more reliable late-style sunroof setup, this housing makes the job possible—without hunting for expensive OEM parts.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included:\u003cbr\u003e1x 3D Printed Gearbox Housing (housing only—no gears, motors, or cables included)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042214887662,"sku":"POR-944-UNI-SNGBX-01","price":14.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0363.jpg?v=1774287612"},{"product_id":"porsche-carrera-924-924-turbo-rms-rear-seal-tool-1976-1988","title":"Porsche Carrera 924 \/ 944 Turbo RMS Rear Seal tool (1976 - 1988)","description":"\u003cp\u003e🔧 Porsche 924 \/ 924 Turbo Rear Main Seal Installer Tool – 2.0L Engine RMS Press-In Tool 🚗💥\u003c\/p\u003e\n\u003cp\u003eSealing up that classic Porsche 924 or 924 Turbo? This Rear Main Seal Installer Tool is purpose-built for the 2.0L motor, making RMS installs smooth, accurate, and leak-free. Whether you're restoring a barn find or maintaining your weekend track toy, this tool ensures your rear main seal is pressed in straight and to the correct depth — no more guesswork, no more crooked installs! 🧰🛠️\u003c\/p\u003e\n\u003cp\u003eRear Main seal size: dimensions of 80 x 100 x 10 mm   \u003c\/p\u003e\n\u003cp\u003e🔥 Why This Tool Rocks:\u003cbr\u003e✅ Perfect Fit for Porsche 924 \/ 924 Turbo with 2.0L engines\u003cbr\u003e✅ Press-In Precision – Applies even pressure to avoid damaging the seal or engine surface\u003cbr\u003e✅ No More Hammering – Prevents misalignment and leaks from uneven seal installs\u003cbr\u003e✅ DIY \u0026amp; Mechanic Friendly – Easy to use whether you’re in a garage or on the lift\u003cbr\u003e✅ Durable \u0026amp; Reusable – Built to last for multiple uses 💪\u003c\/p\u003e\n\u003cp\u003e📦 What You’ll Get:\u003cbr\u003e1× Rear Main Seal Installer Tool for 2.0L Porsche 924 \/ 924 Turbo\u003c\/p\u003e\n\u003cp\u003eKeep your 924 leak-free and running smooth for years to come.\u003cbr\u003eClick “Buy It Now” and seal it up right! 🏁🔧\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀…\u003cbr\u003ebut it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042214953198,"sku":"POR-924944-UNI-RMS-01","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/71f8f5bc-il_fullxfull.7087889843_3e2a.jpg?v=1777088022"},{"product_id":"porsche-944-engine-bay-cover-for-wire-harness-fuse-box-1982-1991","title":"Porsche 944 - Engine Bay Cover for Wire Harness Fuse Box 1982 - 1991","description":"\u003cp\u003e🛠️ Porsche 944 Engine Bay Wire Harness \u0026amp; Fuse Box Cover | 1982–1991 Replacement\u003c\/p\u003e\n\u003cp\u003eGive your classic 944 the protection it deserves with this precision-fit replacement cover for the engine bay wire harness and fuse holder. Molded to clear the firewall and snap into place just like the original, it shields your wiring from heat, grime, and debris—keeping your fuse box safe and dry.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eOEM-Style Fit: Designed to match the exact contours of 944 engine bays from 1982–1991\u003cbr\u003eDurable Material: 3D-printed in ABS for heat resistance and impact strength\u003cbr\u003eEasy Install: Snaps over your fuse-box bracket—no trimming or mods required\u003cbr\u003eFirewall Location: Sits neatly in front of the firewall at the fuse holder\u003cbr\u003eClean Finish: Smooth surface ready for paint or leave it matte black for a stock look\u003c\/p\u003e\n\u003cp\u003eFits These Models\u003cbr\u003ePorsche 944 (all variants) — 1982, ’83, ’84, ’85, ’86, ’87, ’88, ’89, ’90, ’91\u003cbr\u003eAlso compatible with 944 Turbo and S models\u003c\/p\u003e\n\u003cp\u003eWhy You’ll Love It\u003cbr\u003e🔧 Protects Wiring: Shields harness and fuse box from road spray and engine heat\u003cbr\u003e🚀 Restoration Ready: Perfect for restoring original engine bay appearance\u003cbr\u003e🏁 Shop Tough: ABS stands up to under-hood conditions for years of service\u003cbr\u003e📦 Fast Shipping: Ships from our U.S. workshop—order today and get back on the road!\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47042215805166,"sku":"POR-924944-UNI-SNBRK-01","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0907.jpg?v=1776104483"},{"product_id":"porsche-cayenne-958-2011-2018-ash-tray-cubby-replaces-oem-ashtray-small-storage-insert","title":"Porsche Cayenne 958 (2011–2018) Ash Tray Cubby – Replaces OEM Ashtray – Small Storage Insert","description":"\u003cp\u003e📱 Porsche Cayenne 958 Storage Cubby for 2011-2018 Porsche Cayenne (958) – Ashtray Replacement | OEM look 🚗\u003cbr\u003eUpgrade your Porsche Cayenne’s interior with this custom-designed cubby insert that replaces the factory ashtray. Perfectly fitted for the 2011–2018 Porsche Cayenne (958), this cubby provides a sleek and practical way to store your everyday items.\u003c\/p\u003e\n\u003cp\u003eDimensions: 86mm length x 22mm width.\u003c\/p\u003e\n\u003cp\u003eSimply remove your OEM ashtray, slide this cubby into place, and enjoy extra space for small essentials.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e🧩 Perfect Fitment: Direct replacement for the factory ashtray—no tools or modifications needed.\u003cbr\u003e📱 Functional Storage: Ideal for holding most phones (without bulky cases), pens, business cards, coins, or other small items.\u003cbr\u003e🧽 Clean \u0026amp; Organized Look: Keeps your center console neat while maintaining the OEM aesthetic.\u003cbr\u003e🏁 Durable Design: 3D-printed using high-quality automotive-grade material for long-lasting performance.\u003cbr\u003e🚗 OEM-Inspired Style: Matches your Cayenne’s interior design for a seamless appearance.\u003c\/p\u003e\n\u003cp\u003eCompatibility:\u003cbr\u003e✅ Fits Porsche Cayenne 958 models from 2011–2018, including:\u003cbr\u003eCayenne Base\u003cbr\u003eCayenne S\u003cbr\u003eCayenne GTS\u003cbr\u003eCayenne Turbo \/ Turbo S\u003cbr\u003eCayenne Diesel \/ Hybrid\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003ePull out the original Porsche ashtray assembly.\u003cbr\u003eInsert this cubby directly into the opening.\u003cbr\u003eEnjoy your new storage space—no screws, no tools, no hassle!\u003c\/p\u003e\n\u003cp\u003eAdditional Notes:\u003cbr\u003ePhones with thick or rugged cases may not fit.\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47143990362350,"sku":"POR-CAY-958-CUBBY-01","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0359.jpg?v=1774287185"},{"product_id":"porsche-cayenne-958-hidden-ash-tray-dual-aux-switch-panel-2011-2018","title":"Porsche Cayenne 958 Hidden Ash Tray Dual LED\/Aux Switch Panel 2011–2018","description":"\u003ctable align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eGive your Porsche Cayenne interior a clean, OEM-style upgrade with this custom Ash Tray Auxiliary Switch Replacement for 2011–2018 958 models. Designed to replace the rarely used factory ash tray, this hidden panel adds two concealed auxiliary switches while keeping your interior looking factory-fresh.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003ePerfect for LED lights, light bars, rear lighting, accessories, or any 12V add-on you want to control discreetly.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e⸻\u003c\/p\u003e\n\u003cp\u003e🔧 Why Cayenne Owners Love This Upgrade\u003c\/p\u003e\n\u003cp\u003e✔ Hidden \u0026amp; Clean Install\u003c\/p\u003e\n\u003cp\u003eThe switches sit inside the ash tray cavity, keeping them out of sight until you need them. No exposed switches, no cluttered dashboard.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e✔ Makes the Ash Tray Useful Again\u003c\/p\u003e\n\u003cp\u003eTurn an unused space into a functional accessory hub — without drilling or cutting your interior.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e✔ Direct Fit for Porsche Cayenne 958\u003c\/p\u003e\n\u003cp\u003eSlides directly into the ash tray opening for a tight, OEM-like fit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e✔ Two Rocker Switches Included\u003c\/p\u003e\n\u003cp\u003eComes with dual round rocker switches pre-installed, each with wiring leads ready for your accessory setup.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e✔ Durable 3D-Printed ABS\u003c\/p\u003e\n\u003cp\u003eHeat-resistant, tough, and designed for clean integration inside the center console.\u003c\/p\u003e\n\u003cp\u003e⸻\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003c\/p\u003e\n\u003cp\u003e• 1× Ash Tray Replacement Panel (3D-Printed ABS)\u003c\/p\u003e\n\u003cp\u003e• 2× Pre-Installed Rocker Switches\u003c\/p\u003e\n\u003cp\u003e• Wiring pigtails on each switch\u003c\/p\u003e\n\u003cp\u003e⸻\u003c\/p\u003e\n\u003cp\u003e🚘 Compatibility\u003c\/p\u003e\n\u003cp\u003eDesigned for Porsche Cayenne 958 models:\u003c\/p\u003e\n\u003cp\u003e2011–2018 (Base, S, GTS, Turbo, Diesel, Hybrid, Turbo S)\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003c\/p\u003e\n\u003cp\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003c\/p\u003e\n\u003cp\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e🧠 About the Design:\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e🚫 Disclaimer:\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"My Store","offers":[{"title":"2 Switches","offer_id":47262886232302,"sku":"POR-CAY-958-ASHTR2-01","price":15.95,"currency_code":"USD","in_stock":true},{"title":"3 Switches","offer_id":47262886265070,"sku":"POR-CAY-958-ASHTR3-01","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0338.jpg?v=1774285516"},{"product_id":"porsche-cayenne-2011-2018-armrest-latch-replacement-fix-center-console-repair","title":"Porsche Cayenne 958 (2011–2018) Armrest Latch\/Clip Replacement Fix Carbon Fiber - Center Console Repair","description":"\u003cp\u003ePorsche Cayenne 2011–2018 Armrest Latch Replacement – 3D Printed Upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003einstall video: https:\/\/youtube.com\/shorts\/TmgxkXELjj0?si=5NbvOYDlB8YlaHKq\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRestore the functionality of your Cayenne’s center armrest with this precision-crafted 3D-printed latch—designed as a direct replacement for the fragile OEM latch commonly found on 2011–2018 Porsche Cayenne (958) models.\u003c\/p\u003e\n\u003cp\u003eIf your armrest no longer stays closed or the original latch has broken, this cost-effective solution lets you repair your existing armrest without paying $200+ for a full replacement or used assembly.\u003c\/p\u003e\n\u003cp\u003e⭐\u003cspan style=\"text-decoration: underline;\"\u003e Features\u003c\/span\u003e\u003cbr\u003eDirect Replacement: Designed to fit factory armrest assemblies on 2011–2018 Porsche Cayenne models.\u003c\/p\u003e\n\u003cp\u003eDurable Material: Printed with high-strength carbon fiber nylon for improved longevity over the original brittle part.\u003c\/p\u003e\n\u003cp\u003eCost-Effective Fix: Repair your current armrest instead of replacing the full console.\u003c\/p\u003e\n\u003cp\u003eBeginner-Friendly: Straightforward installation with basic tools.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e🛠️ Installation\u003c\/span\u003e\u003cbr\u003eApprox. 15 minutes\u003c\/p\u003e\n\u003cp\u003eSimple enough for beginners\u003c\/p\u003e\n\u003cp\u003eNo modifications required\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTools Needed:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eT15 Torx screwdriver\u003c\/p\u003e\n\u003cp\u003eFlathead screwdriver\u003c\/p\u003e\n\u003cp\u003e📦 \u003cspan style=\"text-decoration: underline;\"\u003eWhat’s Included\u003c\/span\u003e\u003cbr\u003e1× Armrest Latch Replacement (made in PA612-CF \u0026gt; carbon fiber nylon)\u003cbr\u003e(Note: The OEM spring that attaches to the latch is not included. You will reuse your existing spring.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47233213825262,"sku":"POR-CAY-958-ARMRT-01","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/31B28A3E-AF1E-4891-B8A3-F2991DE7AE7A.jpg?v=1776106341"},{"product_id":"porsche-cayenne-955-957-dual-cup-holder-insert-2003-2010","title":"Porsche Cayenne 955 957 Dual Cup Holder Insert 2003-2010","description":"\u003cp\u003e🛠️ Porsche Cayenne 955 957  Dual Cup Holder Insert | 2003 - 2010 | 3D-Printed ABS\u003c\/p\u003e\n\u003cp\u003eUpgrade your Cayenne’s shallow factory cup holders with this precision 3D-printed insert. Insert it in place no tools needed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003eOEM-Spec Fit: \u003cstrong\u003e*RETAINS the OEM functionality of the cubby cover*\u003c\/strong\u003e\u003cbr\u003eDual Cup Design: Deep holds for two beverages 73mm diameter with the medium option or 77.8mm diameter with the large option (note cannot close the cup cubby cover with the large option)\u003cbr\u003eTool-Free Install: Snap in\/out in seconds with no trimming\u003cbr\u003eDurable ABS: Heat- and impact-resistant for long life\u003c\/p\u003e\n\u003cp\u003eFits These Models\u003cbr\u003ePorsche Cayenne 955 957 (03, 04, 05, 06, 07, 08,09, 10)\u003c\/p\u003e\n\u003cp\u003eWhy You’ll Love It\u003cbr\u003e🚗 Stock-Look Finish: Seamless integration with your interior\u003cbr\u003e☕ Spill Prevention: Secures cups in shallow holders\u003cbr\u003e🚚 Fast Shipping: Ships from our U.S. workshop\u003cbr\u003e✅ 100% Satisfaction Guarantee – message me with any questions!\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: Etsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Without Phone Holder \/ Large","offer_id":47445928935662,"sku":"POR-CAY-955957-CUBBY-01","price":26.95,"currency_code":"USD","in_stock":true},{"title":"With Phone Holder \/ Medium","offer_id":47622482264302,"sku":null,"price":27.95,"currency_code":"USD","in_stock":true},{"title":"Without Phone Holder \/ Medium","offer_id":47622482297070,"sku":null,"price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/E14908AE-C69E-45C0-8915-EE1929A048E9.jpg?v=1777577841"},{"product_id":"porsche-cayenne-2003-2010-955-957-sunglass-holder-button-overhead-console-latch","title":"Porsche Cayenne 955\/957 2003-2010 Sunglass Holder Button Replacement - Overhead Console","description":"\u003cp data-end=\"579\" data-start=\"526\"\u003e\u003cstrong data-end=\"579\" data-start=\"526\"\u003einstall link: https:\/\/youtu.be\/P9Ee1s9el04?si=9OUT8ik3PDtEKJOu \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"579\" data-start=\"526\"\u003e\u003cstrong data-end=\"579\" data-start=\"526\"\u003e\u003cbr\u003eOverhead Console Latch Repair Upgrade (2003–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"688\" data-start=\"581\"\u003eRestore your overhead sunglass holder with a permanent fix — not another fragile factory-style replacement.\u003c\/p\u003e\n\u003cp data-end=\"925\" data-start=\"690\"\u003eThe original Porsche button uses a weak 3-piece clip design that commonly breaks over time. Once the mounting tabs fail, the plastic button cover falls off and you’re left pressing the exposed metal spring just to open the compartment.\u003c\/p\u003e\n\u003cp data-end=\"1108\" data-start=\"927\"\u003eThis redesigned replacement solves that problem by mounting directly to the internal console structure using screws — creating a secure, long-lasting repair that won’t detach again.\u003c\/p\u003e\n\u003cp data-end=\"1108\" data-start=\"927\"\u003eFor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1108\" data-start=\"927\"\u003ePorsche Cayenne 955 2003 - 2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli data-end=\"1108\" data-start=\"927\"\u003ePorsche Cayenne 957 2008 - 2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"1113\" data-start=\"1110\"\u003e\n\u003ch3 data-end=\"1146\" data-start=\"1115\" data-section-id=\"oo8d2b\"\u003e🔧 Why the OEM Button Fails\u003c\/h3\u003e\n\u003cp data-end=\"1178\" data-start=\"1148\"\u003eThe factory latch consists of:\u003c\/p\u003e\n\u003cp data-end=\"1292\" data-start=\"1180\"\u003e• a plastic button cover\u003cbr data-end=\"1207\" data-start=\"1204\"\u003e• a metal spring mechanism\u003cbr data-end=\"1236\" data-start=\"1233\"\u003e• a thin plastic mounting interface inside the console\u003c\/p\u003e\n\u003cp data-end=\"1445\" data-start=\"1294\"\u003eWhen that internal plastic interface breaks, the button cannot be reattached — and Porsche expects you to replace the entire overhead console assembly.\u003c\/p\u003e\n\u003cp data-end=\"1508\" data-start=\"1447\"\u003eThis upgraded version eliminates that failure point entirely.\u003c\/p\u003e\n\u003chr data-end=\"1513\" data-start=\"1510\"\u003e\n\u003ch3 data-end=\"1547\" data-start=\"1515\" data-section-id=\"1adnmyq\"\u003e🧱 Reinforced Upgrade Design\u003c\/h3\u003e\n\u003cp data-end=\"1639\" data-start=\"1549\"\u003eInstead of clipping onto fragile plastic tabs like the original part, this improved latch:\u003c\/p\u003e\n\u003cp data-end=\"1865\" data-start=\"1641\"\u003e✔ wraps around the factory spring assembly\u003cbr data-end=\"1686\" data-start=\"1683\"\u003e✔ mounts directly to the console’s inner structure\u003cbr data-end=\"1739\" data-start=\"1736\"\u003e✔ installs securely with original screws\u003cbr data-end=\"1773\" data-start=\"1770\"\u003e✔ prevents the button from popping off again\u003cbr data-end=\"1820\" data-start=\"1817\"\u003e✔ restores proper sunglass holder operation\u003c\/p\u003e\n\u003cp data-end=\"1922\" data-start=\"1867\"\u003eOnce installed, the button remains permanently secured.\u003c\/p\u003e\n\u003cp data-end=\"1922\" data-start=\"1867\"\u003e\u003cspan\u003e⚙️ Note From the Maker!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e🧠 About the Design:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e🚫 Disclaimer:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e⚠️ Disclaimer:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to non-approved returns.\u003c\/span\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":47440480469230,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/CFE8EF9B-2EAE-4C39-9CA1-83DF1426EBD2.jpg?v=1775095549"},{"product_id":"porsche-cayenne-955-957-dash-radio-phone-mount-2003-2010-mag-safe","title":"Porsche Cayenne 955 957 Dash Radio Phone Mount 2003–2010 - Magnet Mount","description":"\u003cp\u003e(link to install) - https:\/\/youtu.be\/5hRSjdBCG5w\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrade your Porsche interior with a clean, OEM-style MagSafe phone mount designed specifically for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✔ Porsche Cayenne 955 (2003–2006)\u003cbr\u003e✔ Porsche Cayenne 957 (2008–2010)\u003c\/p\u003e\n\u003cp\u003eNo vent clips.\u003cbr\u003eNo sticky pads.\u003cbr\u003eNo damage to your trim.\u003c\/p\u003e\n\u003cp\u003eThis precision-designed mount installs behind your factory radio trim using your existing screws for a secure, factory-style fit.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e*NOTE: phone not included*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhat You Get\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eCarbon Fiber Dash Mount Bracket\u003cbr\u003eMagSafe puck\u003c\/p\u003e\n\u003cp\u003e🔧 \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation (Approx. 15 Minutes)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eRemove the radio surround trim\u003cbr\u003eRemove the two factory radio screws\u003cbr\u003eSlide mount between dash and radio bracket (snug fit)\u003cbr\u003eReinstall screws\u003cbr\u003eReinstall trim\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTools Needed:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eTrim Removal\u003cbr\u003eT20 torq screw driver\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e🏁 \u003cstrong\u003eWhy This Mount?\u003c\/strong\u003e\u003cbr\u003e• Designed specifically for 955 \/ 957 Cayenne\u003cbr\u003e• One-piece reinforced design\u003cbr\u003e• 3D printed in Carbon Fiber Reinforced Nylon\u003cbr\u003e• Lightweight yet extremely strong\u003cbr\u003e• Will not damage dash surfaces\u003cbr\u003e• No drilling required\u003cbr\u003e• Clean OEM appearance\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer: \u003cbr\u003eEtsy's fitment guide may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to denial.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":47693477052654,"sku":null,"price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-0752.png?v=1775607185"},{"product_id":"porsche-cayenne-955-957-headlight-mount-lock-tab-replacement-2003-2010","title":"Porsche Cayenne 957 Headlight Mount Lock Tab Replacement 2008-2010","description":"\u003cp\u003einstall link: Porsche Cayenne 957 Headlight Lock Tab Replacement | 2008-2010 DIY Repair\u003cbr\u003ehttps:\/\/youtu.be\/M1ysn9EZG9o\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRestore a secure, factory-style headlight mounting solution on your 2008-2010 Porsche Cayenne (957) without replacing the entire headlight mounting plate.\u003c\/p\u003e\n\u003cp\u003eThese small locking tabs are a common failure point as the original plastic becomes brittle with age and heat. When they break, Porsche only sells the complete mounting plate assembly—often costing $100+ per side. This replacement tab lets you repair the issue quickly and affordably.\u003c\/p\u003e\n\u003cp\u003e✅ Features\u003cbr\u003eDirect replacement for broken headlight mounting plate lock tab\u003cbr\u003eDesigned specifically for Porsche Cayenne 957 (2008–2010)\u003cbr\u003ePrecision 3D printed for strong fitment with Nylon Carbon Fiber\u003cbr\u003eCost-effective alternative to replacing the entire mounting plate\u003c\/p\u003e\n\u003cp\u003e🚗 Compatibility\u003c\/p\u003e\n\u003cp\u003ePorsche Cayenne 957 (2008–2010)\u003cbr\u003eFits left or right mounting plate repair locations where the factory tab has failed.\u003c\/p\u003e\n\u003cp\u003e📦 What’s Included\u003cbr\u003e2x Replacement headlight mount lock tabs\u003c\/p\u003e\n\u003cp\u003e2x 5mm E-clips\u003c\/p\u003e\n\u003cp\u003e🛠 Installation Overview\u003cbr\u003eInstallation requires removal of the headlight mounting plate to access the broken tab location.\u003cbr\u003eA step-by-step install video and detailed instructions will be provided soon to make the process straightforward and repeatable for DIY owners.\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003cbr\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003cbr\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003cbr\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003cbr\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003cbr\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ Disclaimer:\u003cbr\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a 15% restocking fee, and original shipping costs are non-refundable.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":47802674807022,"sku":null,"price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/AE0AAA4E-25DA-4476-BF4C-3E9F1706BCA5.png?v=1777347393"},{"product_id":"porsche-cayenne-955-957-door-trim-cap-replacement-2003-2010-7l0837916b-7l0837916c","title":"Porsche Cayenne 955 \/ 957 Door Trim Cap Replacement (2003–2010) - 7L0837916B 7L0837916C","description":"\u003cp data-start=\"1216\" data-end=\"1262\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRestore your Cayenne’s interior the right way.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1216\" data-end=\"1262\"\u003e\u003cstrong\u003einstall link:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1264\" data-end=\"1429\"\u003eThese small door trim caps commonly \u003cstrong data-start=\"1300\" data-end=\"1337\"\u003ebreak during removal or over time\u003c\/strong\u003e, and OEM replacements are often \u003cstrong data-start=\"1370\" data-end=\"1428\"\u003ebackordered, discontinued, or expensive when available\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"1431\" data-end=\"1646\"\u003eThis upgraded replacement solves the problem with a precision-fit part made from \u003cstrong data-start=\"1512\" data-end=\"1545\"\u003ecarbon fiber reinforced nylon\u003c\/strong\u003e, offering significantly improved strength compared to the original injection-molded plastic version.\u003c\/p\u003e\n\u003cp data-start=\"1648\" data-end=\"1751\"\u003ePerfect for interior repairs, restorations, or preventative replacement while servicing the door panel.\u003c\/p\u003e\n\u003ch3 data-section-id=\"w2eo3m\" data-start=\"1753\" data-end=\"1772\"\u003eCompatible With\u003c\/h3\u003e\n\u003cp data-start=\"1774\" data-end=\"1839\"\u003ePorsche Cayenne 955 (2003–2007)\u003cbr data-start=\"1805\" data-end=\"1808\"\u003ePorsche Cayenne 957 (2008–2010)\u003c\/p\u003e\n\u003cp data-start=\"1841\" data-end=\"1850\"\u003eReplaces:\u003c\/p\u003e\n\u003cul data-start=\"1852\" data-end=\"1908\"\u003e\n\u003cli data-section-id=\"1i7ehqf\" data-start=\"1852\" data-end=\"1878\"\u003e7L0837916B (Driver Side)\u003c\/li\u003e\n\u003cli data-section-id=\"1cmlp76\" data-start=\"1879\" data-end=\"1908\"\u003e7L0837916C (Passenger Side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"1drwwvr\" data-start=\"868\" data-end=\"908\"\u003eHighlights:\u003c\/h3\u003e\n\u003cp data-start=\"910\" data-end=\"1168\"\u003e✔ Replaces fragile OEM trim cap\u003cbr data-start=\"941\" data-end=\"944\"\u003e✔ Fits 2003–2010 Porsche Cayenne (955 \/ 957)\u003cbr data-start=\"988\" data-end=\"991\"\u003e✔ Driver or passenger side available\u003cbr data-start=\"1027\" data-end=\"1030\"\u003e✔ Carbon fiber reinforced nylon construction\u003cbr data-start=\"1074\" data-end=\"1077\"\u003e✔ Stronger than factory plastic\u003cbr data-start=\"1108\" data-end=\"1111\"\u003e✔ Direct-fit replacement\u003cbr data-start=\"1135\" data-end=\"1138\"\u003e✔ Designed from OEM geometry\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker! This part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠\u003cstrong\u003e About the Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫\u003cstrong\u003e Disclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️\u003cb\u003e Disclaimer:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a \u003cstrong data-end=\"466\" data-start=\"444\"\u003e15% restocking fee\u003c\/strong\u003e, and \u003cstrong data-end=\"518\" data-start=\"472\"\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Driver","offer_id":47952906518766,"sku":"POR-CAY-955957-DOORBOTH-01","price":34.95,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":47952906551534,"sku":"POR-CAY-955957-DOORBOTH-02","price":19.95,"currency_code":"USD","in_stock":true},{"title":"Both","offer_id":47952906584302,"sku":"POR-CAY-955957-DOORBOTH-03","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-3660.jpg?v=1784216801"},{"product_id":"porsche-cayenne-955-957-2003-2010-rear-cupholders-with-reducers","title":"Porsche Cayenne 955\/957 (2003-2010) Rear Cupholders Extension with Reducers","description":"\u003cp data-start=\"269\" data-end=\"333\"\u003eUpgrade your rear cupholders to securely fit modern drink sizes.\u003c\/p\u003e\n\u003cp data-start=\"335\" data-end=\"583\"\u003eThe factory Cayenne rear cupholder tray only supports cups up to \u003cstrong data-start=\"400\" data-end=\"418\"\u003e70 mm diameter\u003c\/strong\u003e, which makes most bottles, tumblers, and larger drinks unstable. This extension insert expands compatibility and keeps drinks from tipping or sliding while driving.\u003c\/p\u003e\n\u003cp data-start=\"585\" data-end=\"646\"\u003eOur redesigned insert supports \u003cstrong data-start=\"616\" data-end=\"645\"\u003ethree stepped drink sizes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp data-start=\"648\" data-end=\"755\"\u003e• \u003cstrong data-start=\"650\" data-end=\"659\"\u003e81 mm\u003c\/strong\u003e – large bottles \u0026amp; tumblers\u003cbr data-start=\"686\" data-end=\"689\"\u003e• \u003cstrong data-start=\"691\" data-end=\"700\"\u003e74 mm\u003c\/strong\u003e – medium cups\u003cbr data-start=\"714\" data-end=\"717\"\u003e• \u003cstrong data-start=\"719\" data-end=\"728\"\u003e65 mm\u003c\/strong\u003e – smaller cans \u0026amp; bottles\u003c\/p\u003e\n\u003cp data-start=\"757\" data-end=\"849\"\u003eEach level centers the drink to reduce movement and prevent spills during turns and braking.\u003c\/p\u003e\n\u003ch3 data-section-id=\"hnechj\" data-start=\"851\" data-end=\"882\"\u003eSimple Drop-In Installation\u003c\/h3\u003e\n\u003cp data-start=\"883\" data-end=\"976\"\u003eNo tools required.\u003cbr data-start=\"901\" data-end=\"904\"\u003eJust insert the extension directly into the factory rear cupholder tray.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1xuuaae\" data-start=\"978\" data-end=\"1007\"\u003eDesigned Specifically For\u003c\/h3\u003e\n\u003cp data-start=\"1008\" data-end=\"1081\"\u003ePorsche Cayenne \u003cstrong data-start=\"1024\" data-end=\"1043\"\u003e955 (2003–2007)\u003c\/strong\u003e\u003cbr data-start=\"1043\" data-end=\"1046\"\u003ePorsche Cayenne \u003cstrong data-start=\"1062\" data-end=\"1081\"\u003e957 (2008–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-section-id=\"6fw2uc\" data-start=\"1083\" data-end=\"1110\"\u003eWhy Owners Upgrade This\u003c\/h3\u003e\n\u003cp data-start=\"1111\" data-end=\"1274\"\u003e✔ Holds modern drink sizes securely\u003cbr data-start=\"1146\" data-end=\"1149\"\u003e✔ Reduces cup movement while driving\u003cbr data-start=\"1185\" data-end=\"1188\"\u003e✔ Clean OEM-style fit\u003cbr data-start=\"1209\" data-end=\"1212\"\u003e✔ Quick install in seconds\u003cbr data-start=\"1238\" data-end=\"1241\"\u003e✔ Durable 3D-printed construction\u003c\/p\u003e\n\u003cp data-start=\"1276\" data-end=\"1376\"\u003ePerfect for daily drivers, road trips, and passengers who bring anything larger than a standard can.\u003c\/p\u003e\n\u003cp data-start=\"1276\" data-end=\"1376\"\u003e \u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker! This part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":47955158106350,"sku":"POR-CAY-955957-REARCUP-01","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-1575.png?v=1777308636"},{"product_id":"porsche-911-rear-main-seal-tool-kit-930-964-993-3-piece-precision-install","title":"Porsche 911 Rear Main Seal Tool Kit (930, 964, 993) – 3-Piece Precision Install","description":"\u003cp data-start=\"85\" data-end=\"178\"\u003e\u003cstrong data-start=\"85\" data-end=\"178\"\u003e🛠️ Porsche 911 Rear Main Seal Tool Kit (930, 964, 993) – 3-Piece Precision Installer Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"180\" data-end=\"371\"\u003eTired of misaligned rear main seals on your air-cooled 911? This 3-piece tool ki\u003cspan style=\"font-family: Arial; font-size: large;\"\u003et is the ultimate solution for accurate and stress-free seal installation on Porsche 930, 964, and 993 engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"373\" data-end=\"396\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e🔧\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"376\" data-end=\"396\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"397\" data-end=\"673\"\u003e\n\u003cli data-start=\"397\" data-end=\"495\"\u003e\n\u003cp data-start=\"399\" data-end=\"495\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cstrong data-start=\"399\" data-end=\"418\"\u003eCentering Guide\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Bolts to the crank using OEM hardware to keep the seal perfectly aligned\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"496\" data-end=\"567\"\u003e\n\u003cp data-start=\"498\" data-end=\"567\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cstrong data-start=\"498\" data-end=\"521\"\u003eFlush Seating Punch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Seats the seal level with the engine case\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"568\" data-end=\"673\"\u003e\n\u003cp data-start=\"570\" data-end=\"673\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cstrong data-start=\"570\" data-end=\"594\"\u003e1mm Underflush Punch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– For situations where there’s excess wear on the crankshaft sealing surface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"675\" data-end=\"825\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e📐 Designed for precision, these tools eliminate guesswork and help extend the life of your new rear main seal—no more uneven wear or premature leaks!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"827\" data-end=\"840\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"829\" data-end=\"838\"\u003eFits:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"841\" data-end=\"927\"\u003e\n\u003cli data-start=\"841\" data-end=\"891\"\u003e\n\u003cp data-start=\"843\" data-end=\"891\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003ePorsche 911 (930, 964, 993 air-cooled engines)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"892\" data-end=\"927\"\u003e\n\u003cp data-start=\"894\" data-end=\"927\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eCompatible with stock crank bolts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"929\" data-end=\"955\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e💪\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"932\" data-end=\"955\"\u003eWhy You'll Love It:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"956\" data-end=\"1175\"\u003e\n\u003cli data-start=\"956\" data-end=\"1001\"\u003e\n\u003cp data-start=\"958\" data-end=\"1001\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eEnsures factory-spec alignment every time\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1002\" data-end=\"1046\"\u003e\n\u003cp data-start=\"1004\" data-end=\"1046\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eMade from durable, shop-tested materials\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1047\" data-end=\"1100\"\u003e\n\u003cp data-start=\"1049\" data-end=\"1100\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eIdeal for both DIYers and professional rebuilders\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1101\" data-end=\"1175\"\u003e\n\u003cp data-start=\"1103\" data-end=\"1175\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eA must-have if you’re restoring or resealing a classic air-cooled engine\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1177\" data-end=\"1330\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eDon’t risk your seal job with makeshift methods—install it the right way with this dedicated 3-piece RMS tool kit. Fast shipping \u0026amp; quality guaranteed! 🏁\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1177\" data-end=\"1330\"\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!This part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Ford or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eDISCLAIMER:\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a \u003c\/span\u003e\u003cstrong data-start=\"444\" data-end=\"466\"\u003e15% restocking fee\u003c\/strong\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cstrong data-start=\"472\" data-end=\"518\"\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":47983071985902,"sku":null,"price":23.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/s-l1600_d49a4347-b0d1-469f-b6e7-0d8e9e5f94e2.webp?v=1777947651"},{"product_id":"porsche-cayenne-957-2008-2010-headlight-high-beam-bulb-dust-cover","title":"Porsche Cayenne 957 (2008-2010) Headlight High Beam Bulb Dust Cover (7l5941608 \u0026 7L5941607)","description":"\u003cdiv\u003e\n\u003cp data-end=\"369\" data-start=\"186\"\u003e\u003cb\u003ePorsche Cayenne 957 Headlight High Beam Bulb Dust Cover 2008-2010\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-end=\"369\" data-start=\"186\"\u003e \u003c\/p\u003e\n\u003cp data-end=\"369\" data-start=\"186\"\u003eReplace your missing, cracked, or damaged passenger-side high beam bulb dust cover with a durable, cost-effective solution made specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"368\" data-start=\"335\"\u003ePorsche Cayenne 957 2008-2010\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-end=\"670\" data-start=\"371\"\u003eThis cover is designed to replace the hard-to-find OEM passenger headlight dust cover, helping protect the high beam bulb area from dust, debris, and moisture. Original covers can be difficult to source, with used options often costing\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"615\" data-start=\"607\"\u003e$60+\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand new replacements reaching\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"654\" data-start=\"646\"\u003e$85+\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhen available.\u003c\/p\u003e\n\u003cp data-end=\"827\" data-start=\"672\"\u003eOur replacement is\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"712\" data-start=\"691\"\u003e3D printed in ASA with a runner Insert\u003c\/strong\u003e, a durable material known for its heat resistance, strength, and excellent performance in automotive environments.\u003c\/p\u003e\n\u003ch3 data-end=\"840\" data-start=\"829\" data-section-id=\"1wwzv67\"\u003eFitment\u003c\/h3\u003e\n\u003cp data-end=\"857\" data-start=\"842\"\u003eCompatible for:\u003c\/p\u003e\n\u003cp data-end=\"892\" data-start=\"859\"\u003e\u003cstrong data-end=\"892\" data-start=\"859\"\u003ePorsche Cayenne 957 2008-2010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"924\" data-start=\"894\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"950\" data-start=\"926\" data-section-id=\"x7y64t\"\u003eReplaces Part Number\u003c\/h3\u003e\n\u003cp data-end=\"965\" data-start=\"952\"\u003e\u003cstrong data-end=\"965\" data-start=\"952\"\u003e7L5941608 (Passenger) \u0026amp; 7L5941607 (Driver)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"987\" data-start=\"967\" data-section-id=\"bfe9be\"\u003eProduct Features\u003c\/h3\u003e\n\u003cul data-end=\"1452\" data-start=\"989\"\u003e\n\u003cli data-end=\"1043\" data-start=\"989\" data-section-id=\"18uidt9\"\u003eReplacement passenger-side high beam bulb dust cover\u003c\/li\u003e\n\u003cli data-end=\"1102\" data-start=\"1044\" data-section-id=\"1mu8dgr\"\u003eCompatible for Porsche Cayenne 957 models from 2008-2010\u003c\/li\u003e\n\u003cli data-end=\"1173\" data-start=\"1103\" data-section-id=\"d8lm1r\"\u003eDesigned to replace hard-to-find OEM cover part number\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1173\" data-start=\"1160\"\u003e7L5941608 and 7L5941607\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1245\" data-start=\"1174\" data-section-id=\"c6tqa6\"\u003eHelps protect the headlight bulb area from dust, debris, and moisture\u003c\/li\u003e\n\u003cli data-end=\"1315\" data-start=\"1246\" data-section-id=\"f0j7h7\"\u003ePrinted in durable\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1282\" data-start=\"1267\"\u003eASA plastic\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor strength and heat resistance\u003c\/li\u003e\n\u003cli data-end=\"1388\" data-start=\"1316\" data-section-id=\"143bf0l\"\u003eCost-effective alternative to expensive used or OEM replacement covers\u003c\/li\u003e\n\u003cli data-end=\"1452\" data-start=\"1389\" data-section-id=\"niu5pv\"\u003eGreat solution for broken, missing, or brittle factory covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e⚙️ Note From the Maker! This part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠\u003cstrong\u003e About the Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫\u003cstrong\u003e Disclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️\u003cb\u003e Disclaimer:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a \u003cstrong data-end=\"466\" data-start=\"444\"\u003e15% restocking fee\u003c\/strong\u003e, and \u003cstrong data-end=\"518\" data-start=\"472\"\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Auto Gear Prints","offers":[{"title":"Both","offer_id":47994428588270,"sku":"POR-CAY-957-HIGHCOVERBOTH-01","price":38.95,"currency_code":"USD","in_stock":true},{"title":"Driver","offer_id":47994428621038,"sku":"POR-CAY-957-HIGHCOVERBOTH-02","price":19.95,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":47994428653806,"sku":"POR-CAY-957-HIGHCOVERBOTH-03","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-1957.jpg?v=1778253303"},{"product_id":"porsche-cayenne-957-2008-2010-headlight-low-beam-bulb-dust-cover-95563123700-95563123800","title":"Porsche Cayenne 957 (2008-2010) Headlight Low Beam Bulb Dust Cover (7L5941608A \u0026 7L5941607A)","description":"\u003cp data-end=\"951\" data-start=\"792\"\u003eReplace your missing, cracked, or damaged low beam headlight dust cover with a durable, cost-effective solution made for the \u003cstrong data-end=\"950\" data-start=\"917\"\u003ePorsche Cayenne 957 2008-2010\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-end=\"1255\" data-start=\"953\"\u003eThese headlight rear covers can be difficult to find used and expensive to replace new, especially when sold only as part of larger headlight assemblies. This replacement cover is designed to help restore protection to the rear of the headlight housing without the cost of replacing the full headlight.\u003c\/p\u003e\n\u003cp data-end=\"1483\" data-start=\"1257\"\u003e3D printed in \u003cstrong data-end=\"1278\" data-start=\"1271\"\u003eASA, and rubber seal in TPU\u003c\/strong\u003e, this part is built for automotive use with strong heat resistance, durability, and weather resistance. It is a practical replacement for owners looking to restore function while keeping costs reasonable.\u003c\/p\u003e\n\u003ch3 data-end=\"1496\" data-start=\"1485\" data-section-id=\"1wwzv67\"\u003eFitment\u003c\/h3\u003e\n\u003cp data-end=\"1513\" data-start=\"1498\"\u003eCompatible for:\u003c\/p\u003e\n\u003cp data-end=\"1548\" data-start=\"1515\"\u003e\u003cstrong data-end=\"1548\" data-start=\"1515\"\u003ePorsche Cayenne 957 2008-2010\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"1575\" data-start=\"1550\" data-section-id=\"4nen7d\"\u003ePart Number Reference\u003c\/h3\u003e\n\u003cp data-end=\"1660\" data-start=\"1577\"\u003eDriver \/ Left Side: 7L5941607A\u003cbr data-end=\"1618\" data-start=\"1615\"\u003ePassenger \/ Right Side: 7L5941608A\u003c\/p\u003e\n\u003ch3 data-end=\"1674\" data-start=\"1662\" data-section-id=\"19zqy0x\"\u003eFeatures\u003c\/h3\u003e\n\u003cul data-end=\"2091\" data-start=\"1676\"\u003e\n\u003cli data-end=\"1719\" data-start=\"1676\" data-section-id=\"abi51g\"\u003eReplacement low beam headlight dust cover\u003c\/li\u003e\n\u003cli data-end=\"1766\" data-start=\"1720\" data-section-id=\"n7xxk1\"\u003eCompatible for Porsche Cayenne 957 2008-2010\u003c\/li\u003e\n\u003cli data-end=\"1850\" data-start=\"1767\" data-section-id=\"7jy79h\"\u003eAvailable for driver side, passenger side, or pair depending on listing variation\u003c\/li\u003e\n\u003cli data-end=\"1921\" data-start=\"1851\" data-section-id=\"biunon\"\u003eHelps protect the low beam bulb area from dust, debris, and moisture\u003c\/li\u003e\n\u003cli data-end=\"1961\" data-start=\"1922\" data-section-id=\"w3nxeq\"\u003e3D printed in durable \u003cstrong data-end=\"1961\" data-start=\"1946\"\u003eASA plastic, and the seal in TPU\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2017\" data-start=\"1962\" data-section-id=\"all67\"\u003eCost-effective alternative to hard-to-find OEM covers\u003c\/li\u003e\n\u003cli data-end=\"2091\" data-start=\"2018\" data-section-id=\"179813q\"\u003eGreat solution for missing, brittle, cracked, or damaged factory covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚙️ Note From the Maker! This part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠\u003cstrong\u003e About the Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫\u003cstrong\u003e Disclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️\u003cb\u003e Disclaimer:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a \u003cstrong data-start=\"444\" data-end=\"466\"\u003e15% restocking fee\u003c\/strong\u003e, and \u003cstrong data-start=\"472\" data-end=\"518\"\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Both","offer_id":48003679912174,"sku":"POR-CAY-957-LOWCOVERBOTH-01","price":47.95,"currency_code":"USD","in_stock":true},{"title":"Driver","offer_id":48003679944942,"sku":"POR-CAY-957-LOWCOVERDR-01","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":48003679977710,"sku":"POR-CAY-957-LOWCOVERPASS-01","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/AB6A41AE-BC85-4A6F-854D-446143DA63ED.png?v=1778930695"},{"product_id":"porsche-cayenne-955-957-ashtray-retrofit-for-mictuning-4-gang-switch-panel-2003-2010","title":"Porsche Cayenne 955 957 (2003–2010) Ashtray Retrofit for Mictuning 4-Gang Switch Panel","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLet me know us know if you need a different size\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003elink to wired install: https:\/\/www.youtube.com\/watch?v=1FZi-2BjLrw\u0026amp;t=15s\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003c\/span\u003e\u003cspan\u003ePorsche Cayenne 955\/957 ashtray\u003c\/span\u003e\u003cspan\u003e into a clean, functional switch panel mount.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 3D printed ashtray retrofit is designed to hold the \u003c\/span\u003e\u003cspan\u003eMictuning 4-Gang Switch Panel\u003c\/span\u003e\u003cspan\u003e securely in the factory ashtray location, giving you a discreet OEM-style setup without drilling into your dashboard or leaving the switch panel loose in the cabin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSimply drop the switch panel into the retrofit insert, route your wiring through the bottom slot, and reinstall it into the factory ashtray assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFits \u003c\/span\u003e\u003cspan\u003ePorsche Cayenne 2003-2010 955 957 models\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDesigned for the \u003c\/span\u003e\u003cspan\u003eMictuning 4-Gang Switch Panel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplaces the OEM ashtray insert\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo dashboard drilling required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eClean, discreet, factory-style placement\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBottom slot for cigarette lighter wiring or wire routing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreat for auxiliary lights, off-road lights, and custom accessories\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFitment Note\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits Cayenne 955\/957 models with the \u003c\/span\u003e\u003cspan\u003efactory cigarette lighter ashtray\u003c\/span\u003e\u003cspan\u003e only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDisclaimer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an independently designed 3D printed retrofit part. Porsche and Mictuning names are used only to describe compatibility. Not affiliated with or endorsed by Porsche or Mictuning.\u003c\/span\u003e\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":48040250147054,"sku":"POR-CAY-955957-ASHSWITCHSMALL-01","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/a1cc12c3-32aa-46d6-9e02-a9bf47634a46.png?v=1782210883"},{"product_id":"porsche-cayman-718-2017-2025","title":"Porsche 718 Porsche Cayman \/ Boxster 982 (2017–2025) 85mm Cup Holder Insert – Floor Mounted Tumbler \/ CupHolder","description":"\u003cp data-start=\"390\" data-end=\"550\"\u003eUpgrade your Porsche 718 Cayman or Boxster with a simple, secure cup holder insert designed for everyday cups, bottles, and tumblers up to \u003cstrong data-start=\"529\" data-end=\"549\"\u003e85mm in diameter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"552\" data-end=\"857\"\u003eThis floor-mounted cup holder slides neatly between the \u003cstrong data-start=\"608\" data-end=\"657\"\u003ecenter console carpet and center console trim\u003c\/strong\u003e, using the floorboard to help hold the lower mounting tab in place. No drilling, no tools, no permanent modification — just slide it in, set the floorboard back over the lower mount, and you’re done.\u003c\/p\u003e\n\u003cp data-start=\"859\" data-end=\"1025\"\u003eInstallation takes about \u003cstrong data-start=\"884\" data-end=\"898\"\u003e30 seconds\u003c\/strong\u003e, making this an easy and practical upgrade for Porsche owners who want a more usable cup holder without changing the interior.\u003c\/p\u003e\n\u003cp data-start=\"859\" data-end=\"1025\"\u003eThe factory cup holders in the Porsche 718 Cayman and Boxster are compact and better suited for smaller drinks, like standard 12 oz soda cans. This 85mm cup holder insert gives your 718 a more practical place to hold larger cups, bottles, and tumblers while keeping your drink within easy arm’s reach.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1ma7m6t\" data-start=\"1027\" data-end=\"1042\"\u003eKey Features\u003c\/h2\u003e\n\u003cp data-start=\"1044\" data-end=\"1162\"\u003e\u003cstrong data-start=\"1044\" data-end=\"1091\"\u003eFits 2017–2025 Porsche 718 Cayman \/ Boxster\u003c\/strong\u003e\u003cbr data-start=\"1091\" data-end=\"1094\"\u003eDesigned for the 982-generation Porsche Cayman and Boxster interior.\u003c\/p\u003e\n\u003cp data-start=\"1164\" data-end=\"1285\"\u003e\u003cstrong data-start=\"1164\" data-end=\"1202\"\u003eHolds cups and tumblers up to 85mm\u003c\/strong\u003e\u003cbr data-start=\"1202\" data-end=\"1205\"\u003eGreat for many travel mugs, small tumblers, cans, bottles, and daily drink cups.\u003c\/p\u003e\n\u003cp data-start=\"1287\" data-end=\"1447\"\u003e\u003cstrong data-start=\"1287\" data-end=\"1314\"\u003eQuick 30-second install\u003c\/strong\u003e\u003cbr data-start=\"1314\" data-end=\"1317\"\u003eSimply slide the cup holder mount between the center console carpet and trim, then lay the floorboard over the lower mounting tab.\u003c\/p\u003e\n\u003cp data-start=\"1449\" data-end=\"1557\"\u003e\u003cstrong data-start=\"1449\" data-end=\"1488\"\u003eNo tools or permanent modifications\u003c\/strong\u003e\u003cbr data-start=\"1488\" data-end=\"1491\"\u003eNo drilling, screws, adhesives, or damage to the vehicle interior.\u003c\/p\u003e\n\u003cp data-start=\"1559\" data-end=\"1716\"\u003e\u003cstrong data-start=\"1559\" data-end=\"1599\"\u003eLow-profile, factory-style placement\u003c\/strong\u003e\u003cbr data-start=\"1599\" data-end=\"1602\"\u003eMounts beside the center console for easy driver or passenger access while keeping the cabin clean and functional.\u003c\/p\u003e\n\u003ch2 data-section-id=\"xydb7h\" data-start=\"1718\" data-end=\"1736\"\u003eWhat’s Included\u003c\/h2\u003e\n\u003cp data-start=\"1738\" data-end=\"1769\"\u003e1x 85mm Cup Holder Insert Mount\u003c\/p\u003e\n\u003ch2 data-section-id=\"1dixaz0\" data-start=\"1771\" data-end=\"1781\"\u003eFitment\u003c\/h2\u003e\n\u003cp data-start=\"1783\" data-end=\"1788\"\u003e\u003cstrong data-start=\"1790\" data-end=\"1822\"\u003ePorsche 718 Cayman 2017–2025\u003c\/strong\u003e\u003cbr data-start=\"1822\" data-end=\"1825\"\u003e\u003cstrong data-start=\"1825\" data-end=\"1858\"\u003ePorsche 718 Boxster 2017–2025\u003c\/strong\u003e\u003cstrong data-start=\"1825\" data-end=\"1858\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e⚙️ Note From the Maker!\u003c\/div\u003e\n\u003cdiv\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003c\/div\u003e\n\u003cdiv\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e🧠 About the Design:\u003c\/div\u003e\n\u003cdiv\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/div\u003e\n\u003cdiv\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e🚫 Disclaimer:\u003c\/div\u003e\n\u003cdiv\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e⚠️\u003cb\u003e Disclaimer:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a \u003cstrong data-start=\"444\" data-end=\"466\"\u003e15% restocking fee\u003c\/strong\u003e, and \u003cstrong data-start=\"472\" data-end=\"518\"\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":48119534485742,"sku":"POR-718-CUPINSERT-01","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/6E674861-8E8F-4249-B0D9-C553C2400D38.jpg?v=1781004108"},{"product_id":"untitled-jul9_14-08-16","title":"Porsche Cayenne 955 957 Rear Seat Folding Release Latch Replacement (2003–2010)","description":"\u003cp\u003e\u003cspan\u003elink to install video: https:\/\/youtu.be\/0xYjLMD4L7E?is=kjv3JZgTIbRfGxnc\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003eRestore the folding function of your Porsche Cayenne’s rear seat without replacing the entire seat assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 3d PRINTED replacement rear seat release latch is designed for Porsche Cayenne 955 and 957 models from 2003–2010. The original latch can break over time, preventing the rear seat from folding down. Because this small component is difficult to find separately, the repair can sometimes lead owners to believe they need to replace the entire rear seat assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis replacement latch restores the functionality of the original mechanism using your existing OEM spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFits Porsche Cayenne 955\/957 models from 2003–2010\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRestores rear seat folding and release functionality\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplaces the commonly broken OEM latch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReuses your original OEM spring\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls with basic hand tools\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApproximately 15-minute installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAvailable in black; other colors available upon request\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eInstallation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUsing a T20 screwdriver:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eRemove the two screws holding the latch cover in place.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove the original broken latch.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransfer the OEM spring to the replacement latch.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInsert the new latch into the cover.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReinstall the cover and screws.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003ePlease Note\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpring is \u003c\/span\u003e\u003cspan\u003enot included\u003c\/span\u003e\u003cspan\u003e. The original OEM spring must be transferred to the replacement latch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAssembly reference part number: \u003c\/span\u003e\u003cspan\u003e7L5 885 840\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an independently designed replacement component. Porsche names and part numbers are used only to describe compatibility. This product is not affiliated with or endorsed by Porsche.\u003c\/span\u003e\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Driver Side","offer_id":48282842005742,"sku":null,"price":18.95,"currency_code":"USD","in_stock":true},{"title":"Passenger Side","offer_id":48282842038510,"sku":null,"price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-3627.png?v=1783977393"},{"product_id":"porsche-911-carrera-930-1978-1987-retrofit-rear-speaker-cover-for-aftermarket-speakers","title":"Porsche 911 Carrera 930 (1978-1987) Retrofit Rear Speaker Cover - for Aftermarket Speakers","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUpgrade the audio system in your classic Porsche without leaving oversized aftermarket speakers exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThese rear speaker covers are designed for 1978–1987 Porsche 911 and 930 models fitted with aftermarket speakers that are larger than the original factory speakers. The increased internal clearance allows updated speakers to be installed while maintaining a clean, finished appearance on the rear deck.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eEach cover is professionally 3D printed in durable ASA plastic for improved resistance to heat and UV exposure inside the vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for larger aftermarket rear speakers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProvides more clearance than the original Porsche speaker covers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaintains a clean, period-appropriate appearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufactured from durable ASA plastic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat- and UV-resistant material\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Porsche part number 911-555-019-00\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned and manufactured by Auto Gear Prints\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eImportant Information\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eSpeaker mesh is not included.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe buyer must install their own wire mesh or reuse the mesh supplied with their aftermarket speakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSpeakers, mounting hardware and other audio components are not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eBecause aftermarket speaker sizes and designs vary, please compare the product dimensions with your speakers before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e1978-1987 Porsche 911 930 Carrera Coupe, Targa, Turbo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003c\/p\u003e\n\u003cp\u003eThis part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯You might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":48389843124462,"sku":"POR-911-930-SPEAKERCOV-01","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-4059.jpg?v=1786314359"},{"product_id":"porsche-panamera-970-2010-2016-ashtray-insert-phone-holder-magneti","title":"Porsche Panamera 970 (2010–2016) Ashtray Insert Phone Holder – Magnetic","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUpgrade the interior of your \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePorsche Panamera 970\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with a practical phone holder designed to replace the rarely used factory ashtray insert.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis custom \u003cstrong\u003e3D printed\u003c\/strong\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eashtray insert phone mount\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e gives your Panamera a clean, OEM-like appearance while positioning your phone in a convenient, highly visible location. The holder is angled toward the driver for improved screen visibility while driving, making it ideal for navigation, music, and hands-free use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e*Note because of the way Porsche as designed the ash tray insert, you may have to re-insert the phone holder upon placing\/removing the phone on\/from the mount*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emagnetic phone mount\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is integrated into the holder, allowing your phone to be quickly attached and removed without dealing with clamps, arms, or complicated adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eDesigned specifically for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePorsche Panamera 970\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplaces the OEM ashtray insert\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eClean, integrated \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOEM-style appearance\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAngled toward the driver for improved phone visibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in magnetic phone holder for quick attachment and removal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakes practical use of an otherwise unused ashtray compartment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo permanent modification to your interior\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick and simple installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFactory ashtray insert can be reinstalled at any time\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eEasy Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInstallation takes only seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSimply \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003epush down and forward on the factory ashtray insert to remove it\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, then insert our phone holder assembly in its place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eNo drilling, cutting, or permanent modification is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFits all \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2010–2016 Porsche Panamera 970 models with the ash tray\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePackage Includes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1x Porsche Panamera 970 Ashtray Insert Phone Holder\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x magnetic phone mounting system\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚙️ Note From the Maker!\u003c\/p\u003e\n\u003cp\u003eThis part is \u003cb\u003e3D-printed\u003c\/b\u003e, not OEM — so it may not look factory-perfect 👀… but it \u003cb\u003eworks like a charm\u003c\/b\u003e 🔥💯\u003c\/p\u003e\n\u003cp\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 About the Design:\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 Disclaimer:\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Porsche or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e Vehicle fitment guides may not always be accurate. It is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to approval. Approved returns are subject to a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e15% restocking fee\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eoriginal shipping costs are non-refundable\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":49412371382510,"sku":"POR-970-ASHPHONE-01","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-4236.jpg?v=1787008023"},{"product_id":"porsche-cayenne-2019-2026-ash-tray-insert-phone-cubby-holder-storage-tray","title":"Porsche Cayenne 2019-2026 Ash Tray Insert Phone Cubby Holder Storage Tray","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eThe 2019 –2026 Porsche Cayenne has a beautifully designed interior, but convenient phone storage around the center console is limited. This custom 3D printed phone cubby turns the rarely used factory ashtray location into a practical place to keep your phone within easy reach.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for \u003cstrong\u003ePorsche Cayenne models equipped with the factory ashtray\u003c\/strong\u003e, the cubby replaces the removable OEM ashtray insert. Simply remove the original ashtray insert and place the phone cubby directly into its location.\u003c\/p\u003e\n\u003cp\u003eUnlike a generic phone tray, this cubby was developed around the dimensions of an \u003cstrong\u003eOEM Cayenne ashtray assembly\u003c\/strong\u003e to provide a proper fit in the factory location.\u003c\/p\u003e\n\u003cp\u003eThe raised and angled design was also created with the Cayenne's center console layout in mind. Your phone is positioned conveniently near the driver while maintaining access to the \u003cstrong\u003egear selector without unnecessary obstruction\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor vehicles equipped with the factory front ashtray\u003c\/li\u003e\n\u003cli\u003eReplaces the removable OEM ashtray insert\u003c\/li\u003e\n\u003cli\u003eProvides a dedicated location for your smartphone\u003c\/li\u003e\n\u003cli\u003eDesigned around an OEM ashtray assembly for proper fitment\u003c\/li\u003e\n\u003cli\u003eAngled design keeps the phone easily accessible\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain convenient access to the gear selector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstalls and removes in seconds\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation couldn't be much easier.\u003c\/p\u003e\n\u003cp\u003eRemove the removable ashtray insert from the factory ashtray assembly and insert the phone cubby in its place.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003ePorsche Cayenne 2019 – 2026\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e⚙️ \u003cstrong\u003eNote From the Maker!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis part is 3D-printed, not OEM — so it may not look factory-perfect 👀… but it works like a charm 🔥💯\u003c\/p\u003e\n\u003cp\u003eYou might see some layer lines or texture – that’s just 3D-printing character 😎\u003c\/p\u003e\n\u003cp\u003e🧠 \u003cstrong\u003eAbout the Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product was designed from scratch with original enhancements and utility-driven improvements, based on real-world needs and maker community inspiration.\u003c\/p\u003e\n\u003cp\u003eAny resemblance to other products is coincidental or reflects common goals shared among designers solving the same storage challenges. Full respect to the 3D printing community for fueling great ideas.\u003c\/p\u003e\n\u003cp\u003e🚫 \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are an independent business and not affiliated with or endorsed by Toyota or any automaker. Trademarks, brand names, or OEM references are used strictly for compatibility and fitment clarity. Our products are uniquely developed and produced by us.\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is the buyer’s responsibility to confirm compatibility with their specific vehicle before purchasing. Buyer-requested returns are subject to non-approved returns.\u003c\/p\u003e","brand":"Auto Gear Prints","offers":[{"title":"Default Title","offer_id":49508973347054,"sku":"POR-9Y0-ASHCUBBY-01","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/files\/IMG-4477.jpg?v=1787883063"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/4760\/2158\/collections\/23b17d49-0ee7-4511-b824-d6dfba1110ac.png?v=1767206059","url":"https:\/\/www.autogearprints.com\/collections\/porsche.oembed","provider":"Auto Gear Prints","version":"1.0","type":"link"}